EXFO IQS-3150 User Manual Download

Page: 20 / 169

Getting Started with Your Variable Attenuator

Variable Attenuator

Inserting and Removing Test Modules

Insert the protruding edges of the module into the grooves of the unit’s
module slot.

Push the module all the way to the back of the slot, until the retaining
screw makes contact with the unit casing.

While applying slight pressure to the module, turn the retaining screw
knob (located at the bottom of the panel) clockwise until the knob is
horizontal.

This will secure the module into its “seated” position.

Retaining screw

Retaining screw knob

Protruding edges
(right side of module)

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for IQS-3150










































































































































































Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands

EXFO IQS-3150, User Manual

Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands