EXFO IQS-3150, User Manual

Page: 54 / 169

Setting Up Your Variable Attenuator
Variable Attenuator
47
Saving and Recalling Configurations
To recall a configuration:
1.
Select the Configuration function tab.
2. Click
Open
.
3. Select the configuration file you wish to recall and confirm your action.
You are returned to the application and the new parameters are set.
To revert to factory settings:
1.
Select the Configuration function tab.
2. Click the
Reset Module to Factory Settings
button.
Note: The sequence parameters that you could have set are not part of the data
saved when you click the
Save button for the configuration. You must save
your sequence settings by clicking the Save As button under Sequence File
on the Sequencer tab of the Settings function tab. This way your test
configuration and your sequence settings are all saved.
Note:
When recalling a saved configuration, the fine-tuning step appearing in the
Control Center reverts to the default value.
I
MPORTANT
Reverting to the factory settings will interrupt any module
operation in progress.
I
MPORTANT
The operation may take a few seconds to complete.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com