EXFO IQS-3150 User Manual Download

Page: 19 / 169

Getting Started with Your Variable Attenuator

IQS-3150

Inserting and Removing Test Modules

To insert a module into the controller or expansion unit:
1.

Exit IQS Manager and turn off all your units.

Remove the protective cover from the desired unused module slot.

2a.

Pull the retaining screw knob firmly towards you and release the
bottom of the cover.

2b.

Gently pull the top of the protective cover downwards, to remove
it from the unit grooves.

Position the module so that its front panel is facing you and the top and
bottom protruding edges are to your right.

Retaining screw

knob

Protective cover

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for IQS-3150










































































































































































Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands

EXFO IQS-3150, User Manual

Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands