EXFO IQS-3150 User Manual Download

Page: 58 / 169

Operating the IQS-3150

Variable Attenuator

Installing the EXFO Universal Interface (EUI)

Installing the EXFO Universal Interface (EUI)

The EUI fixed baseplate is available for connectors with angled (APC) or
non-angled (UPC) polishing. A green border around the baseplate
indicates that it is for APC-type connectors.

To install an EUI connector adapter onto the EUI baseplate:
1.

Hold the EUI connector adapter so the dust cap opens downwards.

Close the dust cap in order to hold the connector adapter more firmly.

Insert the connector adapter into the baseplate.

While pushing firmly, turn the connector adapter clockwise on the
baseplate to lock it in place.

Bare metal

(or blue border)

indicates UPC

option

Green border

indicates APC

option

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for IQS-3150










































































































































































Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands

EXFO IQS-3150, User Manual

Search results

Summary of Contents for IQS-3150

Reviews:

Related manuals for IQS-3150

Brands by name

Popular brands