Setting up Your IQ-3100 and/or IQ-3300
Variable Attenuator/Variable Reflector
51
Defining an Automatic Program Mode
Modifying a Program
You cannot modify program steps directly. You must first delete the
erroneous step and insert a new one in its place. You insert and delete
program steps in the
Program settings
window.
1.
To access the
Program settings
window, click on
Program
in the main
window
,
then in the
Program control
window click on
Edit.
2.
To delete a program step, highlight it in the
Program settings
windows
displayed and click on
Delete Step
. To confirm the deletion and to
close the
Program settings
, click on
OK
.
3.
To insert a program step, with the
Program settings
window displayed,
highlight the step where the new line is to be inserted.
4.
Enter the duration and attenuation/reflection values in the appropriate
edit boxes, and click on
Insert step.
The new program step will be
inserted above the highlighted line.
5.
Click on
OK
to confirm the changes and to close the
Program settings
window.
Note:
You may or may not want to save the program, in the
Program Control
window, after completing the changes.
Program step
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
