EXFO FTB-500, User Manual, Page: 437 / 449

Communicating Through TCP/IP over Telnet
FTB-500
429
Internal Commands of the TCP/IP over Telnet Protocol
Enter again the STATUS CLIENT command to confirm the termination of
the module (LINS10 in our example). Only the information of the
remaining connected client is displayed.
STATUS CLIENT
Syntax: STATUS CLIENT
This command lists out all clients with their connection time and modules.
STATUS CONNECTION
Syntax: STATUS CONNECTION
This command lists out all the connections with their Idle or Active status.
Note: If any connection is idle for a certain period (5 minutes by default), the
service automatically changes the status to
Idle .