EXFO FTB-500 User Manual Download Page 419

Page: 419 / 449

Communicating Through TCP/IP over Telnet

FTB-500

411

Configuring Your Unit and Modules to Work With TCP/IP over Telnet

Set the parameters:



Select

Remote Control

to be able to access the module remotely

(via TCP/IP over Telnet or other).



Select

Standalone

to leave the module active even if all users

close their dedicated applications.

If desired, under

Description

, type a description that will help you

identify the instrument.

Note:

You can enter up to 10 characters. The description can correspond to the
test interface ID or to any other short text of your choice.

Summary of Contents for FTB-500


































































































































































































































































































































































































































































Search results

Summary of Contents for FTB-500

Reviews:

EXFO FTB-500, User Manual, Page: 419 / 449

Search results

Summary of Contents for FTB-500

Reviews: