EXFO FTB-500 User Manual Download Page 384

Page: 384 / 449

IEEE 488.2 and Specific Command Reference

376

FTB-500

Specific Commands



Seconds:

The program data syntax for <Seconds> is

defined as a <DECIMAL NUMERIC PROGRAM

DATA> element.

The <Second> is rounded to the resolution of

the clock. It ranges from 0 to 60. A value of 60 is

allowed since rounding may cause a number

greater than 59.5 to be rounded to 60. When this

element is rounded to 60 it shall be set to 0 and

the minute value incremented. Any other carries

shall be rippled through the date.

Example(s)

SYST:TIME 12,47,29

Summary of Contents for FTB-500


































































































































































































































































































































































































































































Search results

Summary of Contents for FTB-500

Reviews:

EXFO FTB-500, User Manual, Page: 384 / 449

Search results

Summary of Contents for FTB-500

Reviews: