EXFO FTB-500 User Manual Download Page 424

Page: 424 / 449

Communicating Through TCP/IP over Telnet

416

FTB-500

Executing SCPI Commands Over Telnet

To connect through TCP/IP over Telnet from a remote

Windows client:
1.

From your computer, start Windows.

On the taskbar, click

Start

(Start button (

) under Windows 8.1 and

Windows 10) and select

Run

In the

Open

box, type

telnet

, and then click

Note:

If you receive an error message, it probably means that the Telnet client is
not already activated on your computer. In this case, in the

Open

box, type

pkgmgr /iu:TelnetClient

, and then click

to enable the client. Once it is

done, perform step 3 again.

Summary of Contents for FTB-500


































































































































































































































































































































































































































































Search results

Summary of Contents for FTB-500

Reviews:

EXFO FTB-500, User Manual, Page: 424 / 449

Search results

Summary of Contents for FTB-500

Reviews: