EXFO FTB-500, User Manual, Page: 425 / 449

Communicating Through TCP/IP over Telnet
FTB-500
417
Executing SCPI Commands Over Telnet
4. In the displayed Telnet editor window, type the
OPEN <IP_ADDRESS_OF_TELNET_SERVER> <PORT>
command to
connect to the TCP/IP Telnet Service.
Example:
open 10.192.2.45 5024
Note: Port 5024 is designated for sending SCPI commands in the Telnet protocol.
5.
Press ENTER to establish a connection with the Service.
Once the connection is established, the READY> prompt is displayed
in the Telnet editor window.
Note:
If the connection cannot be established, the Connection to host lost
message is displayed instead.
IP address of the
IQS, FTB, or LTB
unit
Port number