EXFO FTB-500 User Manual Download Page 246

Page: 246 / 449

Using FTB Products in an Automated Test Environment

238

FTB-500

Error Message Format

Error Message Format

System and device-specific errors are managed by your unit. The generic
format for error messages is illustrated in the following figure.

As shown in the above figure, the message contains three parts:



error number



error description



device-dependent information

Error messages ending in a negative number are SCPI-based errors.

For a complete list of possible errors, see the appendix on SCPI-based
errors.

If you want to work in remote mode, see the section on configuring DCOM
access for your unit in this user guide.

<Error

number>

<Error

description>

;

<Device

dependent

information>

Summary of Contents for FTB-500


































































































































































































































































































































































































































































Search results

Summary of Contents for FTB-500

Reviews:

EXFO FTB-500, User Manual, Page: 246 / 449

Search results

Summary of Contents for FTB-500

Reviews: