manualshive.com logo in svg

EXFO FTB-500, User Manual, Page: 300 / 449

Share
Download
EXFO FTB-500 User Manual Download Page 300

Troubleshooting

292

FTB-500

Restoring Your Unit to Normal Operation

When you want to restore your unit, there are several options. The table 
below gives an overview of the possibilities.

Method

Description

Refresh

The unit will be reverted to its initial state. 

All data files that were saved to the default 

personal folders (Documents, Pictures, etc.) will 

still be available once the operation is complete.

If you have installed products and updates since 

you purchased your unit, you will have to reinstall 

them.

Refer to Microsoft documentation for more 

information.

Reset

The unit will be reverted to its initial state. 

All data files will be lost once the operation is 

complete.

If you have installed products and updates since 

you purchased your unit, you will have to reinstall 

them.

Refer to Microsoft documentation for more 

information.

Restore

The unit will be reverted to the state in which it 

was when the WIM file was created. 

All data files will be lost once the operation is 

complete.

If you have installed products and updates since 

the WIM file was created, you will have to 

reinstall them.

Summary of Contents for FTB-500


































































































































































































































































































































































































































































Reviews:

No comments