Tunable Laser
Source
FLS-2800
FLS-2800 (v1.1)
2
meet the required conditions.
C
AUTION
Indicates a potentially hazardous situation which, if not avoided, may result
in
component damage
. Do not proceed unless you understand and meet
the required conditions.
I
MPORTANT
Refers to information about this product you should not overlook.
1.
Safety Information
W
ARNING
This instrument must be used with an approved IEC cable with an
EARTH terminal. Do not attempt to use this instrument without a
proper earth terminal, doing so may lead to a hazardous condition
and/or damage to the equipment.
Do not install or terminate fibers while a light source is active. Care
must be taken to ensure that the instrument has been turned OFF
before inspecting the end face(s) of the instrument, or any optical
patch cords connected to this instrument. Never look directly into a live
fiber and ensure that your eyes are protected at all times.
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
I
MPORTANT
For electromagnetic compatibility, this instrument is a Class A product.
It is intended for use in an industrial environment. There may be
potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances.
When you see the following symbol on your unit
, make sure that
you refer to the instructions provided in your user documentation.
Ensure that you understand and meet the required conditions before
using your product.
