Tunable Laser
Source
FLS-2800
FLS-2800 (v1.1)
23
Load
To change to a previous configuration for the current FLS-2800. Click ‘
Load
’ and the ‘
Open
’ dialog
will appear.
Navigate to the desired configuration folder and select the desired configuration file then click
‘
Open
’.
Loading configuration files will change the parameters for all the laser sources defined when the file
was created.
Save
The configuration of the current FLS-2800 can be saved to an ‘.xml’ configuration file. When you click
the ‘
Save
’ button a ‘
Save As
’ dialog will open.
Navigate to the desired location to save the configuration file. Click ‘
Save
’ to accept the default, or
type in the desired
File name
and then click ‘
Save
’.
Configuration files will store the current parameters for all the laser sources installed in the unit.
Settings
To change the
Environment Settings
of the Tunable Laser Manager software click the ‘
Settings
’
button.
The
Environment Settings
window will
appear providing tabs to configure
‘Units’
and
‘Network Settings’
.
While in the
‘Units’
tab, radio buttons allow
the selection of the different units.
Selections can be made between displaying
frequency or wavelength and optical power
in mW or dBm by clicking the relevant radio
buttons.
While the
‘Network Settings’
tab is open (
Figure 19), you are able to enter the IP
address search range for device discovery.
Figure 20 - Environment Settings
