.
2 Bolts (M8x45)
Hardware:
5. Computer
Remove
Multi H
Connect the
that come
Attach the Computer (
M5x10
Phillips Screwdriver
2 Bolts (M8x45)
Hardware:
Computer Installation
Remove four M5x1
Hex Tool with Phillips Screwdriver
Connect the Extension Wire
that come from the Computer (
ttach the Computer (
0 Bolts (39
Phillips Screwdriver
2 Curve Washers (Ø8)
Installation
four M5x10 Bolts (
with Phillips Screwdriver
Extension Wire
from the Computer (
ttach the Computer (9) onto the top end of the
39) that were removed.
Phillips Screwdriver provided.
2 Curve Washers (Ø8)
ASSEMBLY
Bolts (39) from the Computer (
with Phillips Screwdriver
Extension Wires (63) and
from the Computer (9). T
) onto the top end of the
) that were removed.
provided.
2 Curve Washers (Ø8)
2 Washers (Ø8)
ASSEMBLY
) from the Computer (
with Phillips Screwdriver provided.
and Extension Sensor Wire
Tuck wires
) onto the top end of the
) that were removed. Tighten
13
2 Washers (Ø8)
Tool:
ASSEMBLY
) from the Computer (9). Remove
provided.
Extension Sensor Wire
uck wires into the Front
) onto the top end of the Front Handlebar Post (
Tighten bolts with
2 Washers (Ø8)
Tool:
Multi Hex Tool with
Phillips Screwdriver
Remove bolts
Extension Sensor Wire (64) to the wires
the Front Handlebar
Handlebar Post (
with the Multi
2 Cap Nuts (M8)
Multi Hex Tool with
Phillips Screwdriver
bolts with the
) to the wires
Handlebar Post (6).
Handlebar Post (6) with four
ulti Hex Tool with
2 Cap Nuts (M8)
Multi Hex Tool with
Phillips Screwdriver
the
) to the wires
Post (6).
) with four
with
