Remove
Frame (5)
(6).Insert the Tension Cable (
(6) and
Connect the Sensor Wire (
Front Main
from the
of the Front
Washers
the Front Main Frame
(38) from the Tension Control Knob (
Put the cable
of Tension Cable
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
and gently
Control Knob (14) and
Control Knob (14) onto the Front Handlebar Post (6) with
Big Curv
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
Right and “L” for Left.
Insert the p
Turn the p
Note: DO NOT turn the pedal shaft
the threads.
Tighten
Screwdriver
right Crank
Tighten
Screwdriver
3. Front Handlebar Post
Remove four M8x1
(5). Slide
Insert the Tension Cable (
pull it out from the square hole of
Connect the Sensor Wire (
Main Frame (
from the Front Handlebar Post (
Front Main Frame (
s (25) that were removed.
Front Main Frame
from the Tension Control Knob (
cable end of resistance cable of Tension Control Knob (
of Tension Cable (
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
gently remove the Clip (79
Control Knob (14) and
Control Knob (14) onto the Front Handlebar Post (6) with
Big Curve Washer (38) tha
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
Right and “L” for Left.
the pedal shaft of Left Foot Pedal
the pedal shaft by hand
Note: DO NOT turn the pedal shaft
the threads.
Tighten the pedal
Screwdriver provided.
ight Crank (46).Turn
Tighten pedal shaft of Right Foot Pedal
Screwdriver provide
Front Handlebar Post
M8x15 Bolts (23
Slide the Front Handlebar Post Cover
Insert the Tension Cable (
pull it out from the square hole of
Connect the Sensor Wire (61
Frame (5) to the
Handlebar Post (
Main Frame (5) and secure
that were removed.
Front Main Frame (5). Remove the
from the Tension Control Knob (
end of resistance cable of Tension Control Knob (
(40) as shown in drawing A
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
remove the Clip (79
Control Knob (14) and Tension Cable
Control Knob (14) onto the Front Handlebar Post (6) with
e Washer (38) that were removed.
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
Right and “L” for Left.
haft of Left Foot Pedal
haft by hand
Note: DO NOT turn the pedal shaft
edal shaft of Left Foot Pedal
provided. Insert
.Turn the pedal
haft of Right Foot Pedal
rovided.
Front Handlebar Post and
23) and four
Handlebar Post Cover
Insert the Tension Cable (40) through into the bottom hole of
pull it out from the square hole of
61) and Extension Hand Pulse Sensor Wire
Extension Sensor Wire
Handlebar Post (6). Insert the
) and secure
that were removed. Slide
Remove the
from the Tension Control Knob (14
end of resistance cable of Tension Control Knob (
) as shown in drawing A
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
remove the Clip (79) after well
Tension Cable (40) as shown in drawing B
Control Knob (14) onto the Front Handlebar Post (6) with
t were removed.
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
haft of Left Foot Pedal
haft by hand in the counter
Note: DO NOT turn the pedal shaft in the
haft of Left Foot Pedal
Insert pedal shaft of Right Foot Pedal
edal shaft by hand
haft of Right Foot Pedal
and Foot Pedal
ASSEMBLY
four Ø8 Curve Washer
Handlebar Post Cover
) through into the bottom hole of
pull it out from the square hole of Front Handlebar Post (
Extension Hand Pulse Sensor Wire
Extension Sensor Wire
Insert the Front
) and secure with four
Slide the Front Handlebar Post Cover
Remove the M5x25 Bolt (
14).
end of resistance cable of Tension Control Knob (
) as shown in drawing A. Pull the resistance cable of Tension
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
well-connected the
(40) as shown in drawing B
Control Knob (14) onto the Front Handlebar Post (6) with
t were removed.
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
haft of Left Foot Pedal (60) into
counter-clockwise
in the clockwise
haft of Left Foot Pedal (60) with
haft of Right Foot Pedal
haft by hand in the
haft of Right Foot Pedal (59) with
Pedal Installation
ASSEMBLY
11
Curve Washers
Handlebar Post Cover (74) up
) through into the bottom hole of
Handlebar Post (
Extension Hand Pulse Sensor Wire
Extension Sensor Wire (64) and
Front Handlebar Post (
four M8x15 Bolt
Front Handlebar Post Cover
Bolt (36) and
end of resistance cable of Tension Control Knob (
Pull the resistance cable of Tension
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
connected the resistance cable of
(40) as shown in drawing B
Control Knob (14) onto the Front Handlebar Post (6) with the M5x25 Bolt (36) and Ø5
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
into threaded hole in
clockwise direction
clockwise direction
with the Multi Hex Tool
haft of Right Foot Pedal
in the clockwise
with the Multi Hex Tool
Installation
ASSEMBLY
Allen Wrench S6
Tool:
Multi Hex Tool with
Phillips Screwdriver
s (25) from
to the Front Handlebar Post
) through into the bottom hole of Front
Handlebar Post (6).
Extension Hand Pulse Sensor Wire
(64) and Extension Wire
Handlebar Post (
Bolts (23) and
Front Handlebar Post Cover
and Ø5 Big Curve Washer
end of resistance cable of Tension Control Knob (14) into the spring hook
Pull the resistance cable of Tension
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
resistance cable of
(40) as shown in drawing B. Attach the Tension
the M5x25 Bolt (36) and Ø5
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
threaded hole in the l
direction until snug.
direction, doing so will strip
Multi Hex Tool
haft of Right Foot Pedal (59) into
clockwise direction
Multi Hex Tool with Phillips
Wrench S6
Multi Hex Tool with
Phillips Screwdriver
from the Front Main
Front Handlebar Post
Front Handlebar Post
Extension Hand Pulse Sensor Wires (65) from the
Extension Wires (63)
Handlebar Post (6) onto the tube
and four Ø8
Front Handlebar Post Cover (74) down
Big Curve Washer
) into the spring hook
Pull the resistance cable of Tension
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
resistance cable of Tension
. Attach the Tension
the M5x25 Bolt (36) and Ø5
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
the left Crank
snug.
, doing so will strip
Multi Hex Tool with Phillips
into threaded hole in
direction until snug.
with Phillips
Wrench S6
Multi Hex Tool with
Phillips Screwdriver
Front Main
Front Handlebar Post
Handlebar Post
from the
s (63)
) onto the tube
Ø8 Curve
(74) down to
Big Curve Washer
) into the spring hook
Pull the resistance cable of Tension
Control Knob(14) up and force it into the gap of metal bracket of Tension Cable (40)
Tension
. Attach the Tension
the M5x25 Bolt (36) and Ø5
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for
eft Crank (46).
, doing so will strip
with Phillips
threaded hole in
until snug.
with Phillips
