Hardware:
Position
holes.
(5) with two
(32).
Position
holes.
(3) with
(32).
2. Front and Rear
Hardware:
4 Bolts (M8x70)
Position the Front Stabilizer (2)
. Attach the Front Stabilizer (
(5) with two M8x70
(32). Tighten cap nuts
Position the Rear Stabilizer (4)
. Attach the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
(3) with two M8x70
Tighten cap nuts
Front and Rear Stabilizer
Hardware:
4 Bolts (M8x70)
the Front Stabilizer (2)
the Front Stabilizer (
M8x70 Bolts (30), two
cap nuts with
the Rear Stabilizer (4)
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
M8x70 Bolts (30), two
cap nuts with
Stabilizers
4 Curve Washers (Ø8)
the Front Stabilizer (2) in front of the Front
the Front Stabilizer (2) onto the front curve of the Front Main Frame
s (30), two Ø8
with the Multi
the Rear Stabilizer (4) behind the Rear
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
s (30), two Ø8
with the Multi
s Installation
ASSEMBLY
4 Curve Washers (Ø8)
in front of the Front
) onto the front curve of the Front Main Frame
Ø8 Curve Washer
ulti Hex Tool
behind the Rear
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
Ø8 Curve Washer
ulti Hex Tool
Installation
10
ASSEMBLY
4 Curve Washers (Ø8)
in front of the Front Main Frame
) onto the front curve of the Front Main Frame
Curve Washers (25), and two M
with Phillips Screwdriver
behind the Rear Main Frame
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
Curve Washers (25), and two M
with Phillips Screwdriver
Tool:
ASSEMBLY
Main Frame (5) and
) onto the front curve of the Front Main Frame
s (25), and two M
with Phillips Screwdriver
Main Frame (3) and
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
(25), and two M
with Phillips Screwdriver
Multi Hex Tool with
Phillips Screwdriver
4 Cap Nuts (M8)
and align bolt
) onto the front curve of the Front Main Frame
s (25), and two M8 Cap Nut
with Phillips Screwdriver provided.
and align bolt
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
(25), and two M8 Cap Nut
with Phillips Screwdriver provided.
Multi Hex Tool with
Phillips Screwdriver
4 Cap Nuts (M8)
align bolt
) onto the front curve of the Front Main Frame
Cap Nuts
provided.
align bolt
the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame
Cap Nuts
provided.
Multi Hex Tool with
Phillips Screwdriver
