9
Set-Up (www.excy.tips)
Open, Closing, and Locking the System
The Excy system was designed to open and close for easy storage and transport. When
folding, watch for pinch hazards. Always tighten Slide prior to opening and closing.
Opening Excy
1.
Place one hand on the Top and remove the Adjustment Pin from the Clevis Pin
Hole. To remove the Adjustment Pin, release the spring part from around the end
and rotate it to other side of the pin where it is attached. Grab the free end of the
spring and pull the pin out while twisting back and forth.
2.
Leave one hand on the Top. Use the other hand to lift the Rear by holding onto
the Slide Bumpers.
3.
Pick your workout position (see workout adjustment section).
4.
To use Excy in the standing position, the Adjustment Pin MUST be removed
completely and the Slide fully inserted. Place the Adjustment Pin in the top Pin
Holder when not in use to avoid losing it.
