36
Administration
port and start a DHCP server to provide other computers in the LAN with
network information. If a DHCP server is found in the LAN, B3 will obtain IP-
address automatically on the LAN port. B3 will also try to retrieve network
settings on WAN port (Internet). Editing the WAN and LAN sections is not
possible in this profile.
• Fi Server mode - B3 will use a fixed IP address
(192.168.10.1) on the LAN port and start a DHCP server to provide other
computers in the LAN with network information. B3 will also try to retrieve
network settings on WAN port (Internet). It is possible to manually edit the
network settings in this profile.
• Server only - B3 will automatically try to retrieve network settings on LAN.
The WAN port should be left unconnected. It is possible to manually edit the
network settings in this profile.
After editing the network settings you might need to reboot your computers
and other network devices in your LAN.
Update saves your changes.
wan
Here you configure how your B3 will handle your Wide Area Network (WAN)
port. The default setting is to Obtain an IP address.
• Obtain IP-address automatically (DHCP) - The Dynamic Host Configuration
Protocol (DHCP) automates the assignment of IP address, Netmask, Default
Summary of Contents for B3
