Excito B3, User Manual

Page: 62 / 154

62
B3aswirelessaccesspoint
7. Click the ‘Advanced wireless settings’ tab to reach the advanced settings.
8. Select frequency band, 2.4GHz or 5GHz, depending on your other network
clients. All clients that shall communicate must be on the same frequency.
9. Choose what mode to use in your wireless network.
◦
Legacy mode (802.11a/g) - Select this if all of your wireless clients are
802.11a/g.
◦
Mixed mode (802.11n + 802.11a/g) - Select this if you are using 802.11n
or/and 802.11a/g wireless clients.
10. Choose the channel width. Choosing 40MHz in a 802.11n network might
improve the transfer rate.
◦
Select 20MHz if you are not using any 802.11n wireless clients.
◦
Select 40MHz if you are using 802.11n wireless clients only.
11. Choose preferred encryption. WEP2 is recommended. All your network
clients need to have the selected encryption method as your AP (B3) avail-
able to be able to connect to your wireless network. Choose between
◦
None
◦
WEP
◦
WPA1