Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
202675-005
59
2011-08-30
VLAN Configuration Page
VLAN is disabled as the default setting for Exalt radios. The Exalt radios still pass VLAN and non-
VLAN traffic across the link, but do not examine the VLAN traffic or act upon it. Enable VLAN using
the Exalt GUI for expanded VLAN support.
Figure 40 VLAN Configuration page
The top table allows the configuration of the default VLAN assigned to each interface and the VLAN
used for radio management. VLAN may be enabled in one of three different ways:
•
Where programmed VLANs from the bottom table are passed and all other traffic is blocked.
•
Where programmed VLANs from the bottom table are passed, untagged traffic is passed, and
VLANs not in the table are blocked.
•
Where programmed VLANs from the bottom table are passed, untagged traffic is tagged with the
default VLAN assigned to the interface, and VLANs not in the table are blocked.
In the bottom table, create a list of VLANs to pass on the selected interface. This list can be in the form
of individual VLAN IDs, separated by commas, and/or ranges of VLAN IDs. (for example, 105, 109.
111–145, 156, 254–275).
Note:
Once a management VLAN is configured or modified and the Update button clicked,
the management connection will likely be lost. The management connection to the radio must
follow the configuration to the assigned VLAN. After configuring and enabling the
management VLAN on the radio, reconfigure your network’s management access to match
the settings on the radio.
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
