Exalt Installation and Management Guide
EX-i Series FDD Digital Microwave Radios
202675-005
39
2011-08-30
Enable the SNMPv3 options to allow entering read and read/write user names and passwords. These
entries are de-coupled from the standard radio user names and passwords. SNMPv3 provides full
management security.
SNMP Traps
SNMP traps alert the central network management system with important issues about the radio
system. Trap filters are set on the Traps Configuration page (Figure 26). Not all EX-i Series FDD
radios support SNMP traps. Consult the release notes for more information and enable the desired trap
version by clicking the box to the left of the version of trap(s). Ethernet port(s) that are assigned to
Management (per the setting on the
Ethernet Interface Configuration Page
) must be connected to the
network to allow trap information to reach the designated IP address. In a bridged network, this may
not require special network settings. In a routed network, the connected router must have a defined
path for the IP address.
Figure 26 Trap Configuration page
The following traps are available:
•
Authentication Trap: This is an SNMP standard trap when password information for SNMP is
incorrect. This can help identify unwanted intrusions into the management system and for
diagnosis of SNMP issues for valid users.
Note:
The
Update
button must be clicked to save any changes to this page.
Summary of Contents for EX i GigE Series
Page 133: ...202675 005 2011 08 30...
