EWS ES2030 SV, Manual, Page: 6 / 39

ES2030 SV Service and regeneration display 3
Service and regeneration display
LED control lamps
Coloured control lamps show the unit’s major states :
Filter 1 service (green)
Filter 2 service (green)
Filter 1 regeneration (orange)
Filter 2 regeneration (orange)
IN1 = Input 1 active (orange)
IN2 = Input 2 active (orange)
OUT1 = Output 1 active (orange)
OUT2 = Output 2 active (orange)
LCD display
First LCD line
The first line of the LCD display shows the
present state of the system, e.g. “Filter1 in
service”, “Filter 2 in regeneration” or “not in
service”.
Second LCD line during service
The second line of the LCD display shows the
following information during service:
1. The amount of water remaining until the next
regeneration
or:
The time of the next regeneration if a
‘delayed regeneration’ has been initiated
(see program step 6).
or:
The number of hours until the next
regeneration (see program step 7).
or:
Alternating with the ‘amount of water
remaining’ of the current through flow (see
program step 10.1 : pulse count)
or:
The flushing time remaining (see program
step 19)
or:
“No Autom. Reg” if no automatic initiation of
regeneration was selected (water meter,
time interval).
2. The current time
Second LCD line during regeneration
During regeneration, the second line of the
LCD display shows the remaining time for the
current phase and after the oblique the
remaining time for the whole regeneration.
Or:
Alternating with the regeneration times, the
remaining time for the additional program (see
program step 15).
Service unit 1
100.00m3 Mo12:00
Regener.unit 1
Phase:2 80/100m
1 2
IN1 IN2 OUT1 OUT2
Service unit 1
100.00m3 Mo12:00