ES2030 SV
Notes on installation and initial use
32
Notes on installation and initial use
General
Installation and commissioning of the control system may only be carried out by trained specialists
who are familiar with these operating instructions and the applicable regulations on safe working
practices and accident prevention. The instructions given in this manual must always be observed and
followed.
To guarantee functional operation and safety, the instructions in this manual must be followed. The
manufacturer accepts no liability for damage resulting from failure to follow the instructions.
Assembly
-
Do not install under damp pipes. Fit shielding if necessary.
-
Install device at eye level and easily accessible to the user.
Connection
-
Before carrying out connection work, always ensure the control unit is first disconnected
from the power supply. Make sure that the power supply remains disconnected during
connection work.
-
Make electrical connections. Observe local regulations.
Connect supply voltage and ground to the terminals shown in the wiring diagram.
-
Make sure that the ground connection is faultless.
-
If possible, keep all extra low voltage cabling (digital inputs, measurements) separate from
the power supply cable.
-
It is not permitted to connect the potential-free relays with a combination of 230 VAC and
extra low voltage.
-
Some external relays, magnetic switches, solenoid valves, etc. can cause unwanted
interference pulses when switched off.
For this reason, it is recommended that the components mentioned should be equipped
with a so-called RC network in advance.
Ask the supplier of the mentioned components for the correct type of RC network.
Maintenance
The control system does not contain any user-serviceable parts. Unauthorised modifications and/or
repairs to the control unit will void all warranty claims and the manufacturer's liability.
Commissioning
-
Keep front lid closed at all times
-
The control system may only be switched on if it is completely closed and all connections
have been made correctly.
Summary of Contents for ES2030 SV
Page 34: ...ES2030 SV Wiring diagram 31...