Functional characteristics
Organising welding tasks (Mode "JOB Manager")
Item No.: 099-000155-EWM01
35
5.6.2
Creating a new JOB in the memory or copying a JOB
NOTE
It is normally possible to adjust all 256 JOBs individually. However, it is a good idea to
assign specific JOB numbers in the free memory (JOB 128 to 256) for specific welding
tasks.
Copying a pre-defined welding task from the fixed memory (JOBs 1 to 128) to the free memory
(JOBs 129-256):
NOTE
Define welding task which most closely matches the required application.
Operating
element
Action Result
Display
VOLT
JOB
PROG
x x
Select JOB Manager mode
Press until the “VOLT”
signal light is on
VOLT
JOB
PROG
2 sec.
Select JOB Manager mode
VOLT
JOB
PROG
1 x
Switch from “Load JOB” to “Copy JOB”
Select the required JOB number using the rotary
transducer (e.g. 150)
VOLT
JOB
PROG
1 x
JOB has been copied to the free memory, machine
switches back to Display mode. The JOB can be
modified individually.
Current value and JOB
number displayed
