Design and function
MIG/MAG welding
099-005313-EW501
02.09.2015
31
5.7.2
MIG/MAG function torch
The torch trigger on the MIG welding torch is generally used to start and finish the welding process.
Function torches feature additional operating elements to set the wire feed speed and voltage correction.
Welding torches with one rotary knob, one rocker or one pair of buttons only must be configured on the
machine control appropriately. For this purpose, set the FRC special parameter to the corresponding
accessory component.
- See 5.13 Special parameters (advanced settings) chapter
5.7.3
MIG/MAG Push/Pull welding torch
5.7.3.1 Pin assignment
No potentiometers
With potentiometer for wire
feeding speed
With potentiometers for wire
feeding speed and arc length
correction
Figure 5-7
