![background image](http://html1.mh-extra.com/html/ewm/picomig-305-d3-puls/picomig-305-d3-puls_operating-instructions-manual_2448183036.webp)
Design and function
MIG/MAG welding
36
099-005313-EW501
02.09.2015
Figure 5-10
Item Symbol
Description
0
1
Welding wire
2
Wire feed nipple
3
Guide tube
4
Adjusting nut
• Extend and lay out the torch hose package.
• Carefully unwind the welding wire from the wire spool and insert through the wire feed nipples up to
the wire feed rollers.
• Press the inching push-button (the drive catches the welding wire and automatically guides it to the
welding torch outlet).
A prerequisite for the automatic inching process is the correct preparation of the wire guide,
especially in the capillary and wire guide tube area .
• The contact pressure has to be adjusted separately for each side (wire inlet/outlet) at the feed roll
tensioner setting nuts depending on the welding consumable used. A table with the setting values can
be found on a sticker near the wire drive.
Version 1: left hand mounting
Version 2: right hand mounting
Automatic inching stop
Touch the welding torch against the workpiece during inching. Inching of the welding wire will stop as
soon it touches the workpiece.