Design and function
MIG/MAG welding
60
099-005504-EW501
20.11.2015
Example 1: Welding workpieces with different sheet metal thicknesses (non-latched)
Figure 5-27
Example 2: Welding different positions on a workpiece (latched)
Figure 5-28
Example 3: Aluminium welding of different sheet metal thicknesses (non-latched or latched
special)
Figure 5-29
Up to 16 programs (P
A0
to P
A15
) can be defined.
An operating point (wire speed, arc length correction, dynamics/choke effect) can be defined
permanently in each program.
Program P0 is an exception: the settings for operating points are made manually here.
Changes to the welding parameters are saved immediately!
