Machine description
– quick overview
Machine control
– Operating elements
099-005504-EW501
20.11.2015
25
Item Symbol
Description
0
5
Rotary knob, welding parameter setting
•
Setting the welding task (JOB). With machines of the Phoenix Expert series,
welding tasks are selected at the power source control.
•
Setting the welding power and other welding parameters.
6
Select operating mode button
Non-latched
Latched
Signal light lights up in green: Special non-latched
Signal light lights up in red: MIG spot welding
Special latched
7
Welding type push-button
Standard arc welding
Pulsed arc welding
8
Push-button, throttling effect (arc dynamics)
Arc is harder and more narrow
Arc is softer and wider
9
Arc length correction/selection of welding program, rotary dial
•
Correction
of the
arc length from -9.9 V to +9.9 V.
• Selection
of welding programs 0 to 15 (not possible if accessory components, such
as program torches, are connected).
10
Button, Parameter selection (right)
VOLT
Welding voltage
Prog
Program number
kW
Welding performance display
Gas flow quantity (optional)
11
Display, right
Welding voltage, program number, motor current (wire feed mechanism)
12
Gas test / rinse button
• Gas test:
For setting the shielding gas quantity
• Rinse:
For rinsing longer hose packages
- See 5.8 Shielding gas supply (shielding gas cylinder for welding machine) chapter
13
Push-button, wire inching/motor current (wire feed mechanism)
- See 5.10.2.4 Inching the wire electrode chapter
