Ewellix CASM-100, Installation, Operation And Maintenance Manual

Page: 19 / 30

19
7.0 O p eration
7.5.5 Asynchronous Motors
Inline mounting
M
C
1
MF
G1
SM3*
GB
1
S5*
G
3
C
2
GB
2
LU
S6*
S1*
G
4
G2
• Attach the coupling (C1) to the motor (M) using screw (S4).
• Put the sealing (G1) into the groove in the motor flange
(MF) and tighten the flange with four screws (SM3).
• Fit the inline gearbox (GB1) onto the motor flange (MF) by
inserting the gasket (G2) between the two components
and tighten the screws (S5).
• Attach the coupling (C2) to the linear unit (LU) using screw
(S4).
• Fit the inline gearbox (GB2) onto the linear unit (LU) by in-
serting the gasket (G4) between the two components and
tighten the screws (S1).
• Screw the linear unit (LU) and the inline gearbox (GB2) with
the inline gearbox (GB1) and the gasket (G3) together with
the four screws (S6).
*These screws depend on the motor type they do not correspond to the same indices as
in table 1
Table 3
Screw size / tightening torques (inline)
Interface Type S1 SM3 S5 S6
Screw Torque Screw Torque Screw Torque Screw Torque
AC71 / B14 M12x40 75 Nm M6 10 Nm M10x30 40 Nm M10x30 40 Nm
AC80 / B14 M12x40 75 Nm M6 10 Nm M10x30 40 Nm M10x30 40 Nm
AC90 / B14 M12x40 75 Nm M8 20 Nm M10x30 40 Nm M10x30 40 Nm
AC100 / B14 M12x40 75 Nm M8 20 Nm M10x30 40 Nm M10x30 40 Nm