10
CA S M -1 0 0
4.4 Sensor mounting
• Sensor can be inserted in two slots s on the CASM-100
electro cylinder (see image below).
• Install the sensors: the sensors can be inserted into the
slots from above. The cable ends should lead into the drive
direction. Push the sensors to their approximate positions
in the slots of the cylinder body. Tighten the fixing screws
on the limit switches slightly and lead the cable along the
profile slots.
NOTE
Instructions to install the sensor can be found on the supplier’s
website.
Supplier : Balluff (www.balluff.com)
Sensor Type : BMF 235K
