EVS Synapse GMD100 Installation And Operation Manual Download Page 40 | Manualshive

Page: 40 / 48

background image

Precautions

Backing Up Your Settings

It is advised to back up the settings before upgrading the card. To do this, select the frame and card you
want to upgrade. Then select

Card

>

Backup card

in the menu. An exact copy of the card’s menu can

be stored as an .xml file in the following window. The image below displays the window where this is
done.

At Your Own Risk

During the upgrade process, the card will stop functioning for a period of time. Make sure that the card
you are going to upgrade is currently not being used by anyone in your company.

Use Cortex version 1.09.01 or later. This software can be downloaded from the EVS website.

Setting Up a Card

To be able to program the card directly, we need to perform two steps:

1.

Setting up the IP address of the card, and

2.

Enabling the board to be recognized as a stand-alone entity.

To set up the IP address of the card, go to the System View within the Cortex program. Select the
HLDxxx and go to the Device view tab. Within the Device tab, you will be able to set up the IP address,
netmask and gateway.

32

| November 2021 | Issue 1.0.C

«
...
38
39
40
41
42
...
»

Summary of Contents for Synapse GMD100

















































Reviews:

No comments

Related manuals for Synapse GMD100

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: JB-Lighting Pages: 60

Brand: Abicor Binzel Pages: 92

Varycolor MICRO 150HTI

Brand: JB-Lighting Pages: 18

Brand: Omlet Pages: 2

Brand: Omicron Pages: 382

Brand: Omicron Pages: 188

QNET Physics and Dynamics

Brand: Quanser Pages: 4

Brand: VDO Pages: 15

Brand: VDO Pages: 20

Brand: Marcy Pages: 9

Chandler Engineering 1910

Brand: Ametek Pages: 46

Brand: ORORO Pages: 16

Dual-Lite EVHC-BC Series

Brand: Hubbell Pages: 2

AIR CHAMP BD Caliper Brake

Brand: Nexen Pages: 16

Einthoven CR1000

Brand: ACE Solution Pages: 29

Brand: Almat Pages: 4

Brand: ITEM Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands