EVS Synapse GMD100, Installation And Operation Manual

Page: 28 / 48

SFP2-Vendor These status item display the name of the vendor of the SFP input/output
module B.
SFP2-Type These status items display the type name/number of SFP input/output
module B.
SFP2-Temp-Stat These indicate whether the above indicated temperature of SFP
input/output module B is Too_High, High, OK, Low or Too_Low. This can also
be NA if Temperature monitoring is not available or the module is not
inserted.
SFP2-Volt-Stat These indicate whether the above indicated voltage usage of SFP
input/output module B is Too_High, High, OK, Low or Too_Low. This can also
be NA if Voltage monitoring is not available or the module is not inserted.
Port3-Enabled ~ Port4-
Enabled This item indicates whether the corresponding output on SFP output module
is enabled, disabled or NA (Not available, when no input signal is available or
an input module is inserted).
Port3-Power ~ Port4-
Power These status items indicate the current transmitter power of the specified
port on SFP output module B between 0mW and 6.553mW. When an input
module is inserted or no SFP module is inserted this value is 0.
Port3-Pow-Stat ~
Port4-Pow-Stat These indicate whether the output power of the specified port on SFP
output module B is Too_High, High, OK, Low or Too_Low. Can also be NA if
an input module or no module is inserted.
Port3-Bias ~ Port4-Bias These status items indicate the current laser bias of the specified port on
SFP output module B, between 0mA and 300mA. When there is a non fiber
SFP or RX SFP installed, this value will be 0.
Port3-Bias-Stat ~
Port4-Bias-Stat These indicate whether the laser bias of the specified port on SFP output
module B is Too_High, High, OK, Low or Too_Low. This can also be NA if
laser bias monitoring is not available or no module is inserted.
Port3-Wavelength ~
Port4-Wavelength Indicates the current wavelength of the corresponding output port on SFP
output module B, between 0nm and 12000nm. When there is a non fiber SFP
or RX module installed, this value will be 0.
20 | November 2021 | Issue 1.0.C