EVS Synapse GMD100, Installation And Operation Manual

Page: 24 / 48

#Emb1_Ch01/04 ~
#Emb1_Ch13/16 These settings allow you to select the source of the audio channels which
need to be embedded into the SDI output. You can choose between the
following values:
• Source: SDI_Input_1 ( value ‘0’), channel: Ch1 (value ‘0’) to Ch16 (value ‘f’)
• Source: SDI_Input_2 (value ‘1’), channel: Ch1 (value ‘0’) to Ch16 (value ‘f’)
• Source: Quadspeed bus (value ‘2’), channel: Ch1 (value ‘0’) to Ch16 (value
‘f’)
• Source: Quadspeed bus (value ‘3’), channel: Ch17 (value ‘0’) to Ch32 (value
‘f’)
• Source: Off (value ‘f’), channel: N/A. Mutes the corresponding output
channel.
Defaults are (source: SDI_Input_1, channels: straight):
• #Emb1_Ch01/04 = 00010203
• #Emb1_Ch05/08 = 04050607
• #Emb1_Ch09/12 = 08090a0b
• #Emb1_Ch13/16 = 0c0d0e0f
#Emb1_Gain01 ~
#Emb1_Gain16 Adjusts the gain for the corresponding audio channel between -999 and 12dB.
Everything below -999 dB means the audio will be muted. Default is 0dB
#Emb1_Delay01 ~
#Emb1_Delay16 Adjusts the delay of the corresponding audio channel between -20,000ms
and 20,000ms. Default is 0ms.
#Emb1_Phase01/16 Adjusts the audio phase of the corresponding individual audio channel to 0
deg (‘0’) or 180 deg (‘1’). Default is 0000000000000000 (channel numbers
incrementing from left to right), i.e. all phase inversion is off.
5.6. GPIO Options
Setting Description
GPI-DebounceTime This setting allows you to specify the permitted delay for valid signals on all GPIs
(general purpose inputs). Values can be from 1ms through 40ms. default is
10ms.
16 | November 2021 | Issue 1.0.C