EVS Synapse GMD100, Installation And Operation Manual

Page: 19 / 48

#Inp_SelA With this item you can select which input you want to use for Channel A.
It is possible to select physical inputs:
SDI-1 SFP1-1 Zoneplate
SDI-2 SFP1-2 Colorbar
SDI-3 SFP2-1
SDI-4 SFP2-2
You can also choose a Zoneplate or Colorbar as input. The default for this
setting is SDI-1.
#Inp_SelB With this item you can select which input you want to use for Channel B.
It is possible to select physical inputs.
SDI-1 SFP1-1
SDI-2 SFP1-2
SDI-3 SFP2-1
SDI-4 SFP2-2
The default for this setting is SDI-2.
#Out-FrmtA With Out-Frmt you can set what the output should be. Possible settings
are:
• 1080i60 • 1080i50 (default)
• 1080p60 • 1080p50
• 1080p25
• 720p60 • 720p50
• SD525 • SD625
#Output_Map_A This sets the output mapping of channel A. Level-A and Level-B-DL (=
dual link) are the possible settings. In Auto (default) it follows the
detected mapping on the input.
#F_delayA F-Delay sets the number of delayed Frames. The available range is from
0 to 1936 frames (dependent on the I/O). Default is 0F. The preset master
for this is Out-Frmt, hence the # prefix.
Format Max F-delay Delay 50Hz Delay 59.94Hz
1080p50/p60 484fr 9.68 sec 8.07sec
1080i50/i60 484fr 19.36 sec 16.15 sec
720p50/p60 968fr 19.36 sec 16.15 sec
SD625/525 1936fr 77.44 sec 64.60 sec
INSTALLATION AND OPERATION MANUAL
Synapse GMD100 | 5. Settings Menu | 11