EVS Synapse 2GF100/110, Installation & Configuration Manual

Page: 30 / 53

INSTALLATION AND CONFIGURATION MANUAL
2GF100/110 – 2HF100/110
–
2SF100/110
28
#EmbD1_Inp_Ch
~
#EmbD4_Inp_Ch
With these settings you can select which Channel of the selected
input should be embedded to the corresponding output channel. Can
be any channel between
Ch_1
and
Ch_16
. Defaults for C1 till C4
are respectively
Ch_13
till
Ch_16
.
#EmbA1_Gain ~
#EmbD4_Gain
Adjusts the gain for the corresponding audio channel between -60
and 12dB. Everything below -999 dB means the audio will be
muted.
#EmbA1_Phase ~
#EmbD4_Phase
Adjusts the audio phase of the corresponding to 0 deg or 180 deg.
GPI-CTRL
GPI-Ctrl
You can set the GPI to be triggered in a
latching
manner or in a
nonLatching
manner. Default for this is
Latch
.
GPI_1 ~ GPI_5
In this card it is possible to make the 5 available GPI triggers part of
a GPI pool that can control the various functions in the card
separately (all
Xx_Ctrl
items of the menu). With these item you
can select which pool the corresponding GPI is part of and in what
way it should trigger. You can also choose to not use the
corresponding GPI at all by setting it to
Off
. Possible settings are:

GPI A
: part of GPI-A pool, triggered once Take A is closed.

GPI B
: part of GPI-B pool, triggered once Take B is closed.

Take A
: part of GPI-A pool, used to trigger GPI A.

Take B
: part of GPI-B pool, used to trigger GPI B.

GPI Prio A
: part of GPI-A pool, working in a priority
manner (highest closed GPI of the pool is activated)

GPI Prio B
: : part of GPI-B pool, working in a priority
manner (highest closed GPI of the pool is activated)

GPI Prio C
: part of GPI-C pool, working in a priority
manner (highest closed GPI of the pool is activated)
Please refer to ‘Appendix 2: GPI’s explained’ for a more elaborate
explanation of the GPI settings.
NETWORK
IP_Conf0
With this setting you can let the card obtain an IP address