EVS Synapse 2GF100/110, Installation & Configuration Manual

Page: 14 / 53

INSTALLATION AND CONFIGURATION MANUAL
2GF100/110 – 2HF100/110
–
2SF100/110
12
output format for a constant latency operation.

30 Frames delay offset (per channel)

1080i60

1080i50

1080p30

1080p25

1080p24

1080p60

1080p50

60 Frames delay offset (per channel)

720p60

720p50


125 Frames delay offset (per channel)

SD525

SD625

5 GPI inputs assignable to different preset banks

Input selection

Output mode

Audio shuffling, gain and phase (110 only)

ARC triggers by VI, WSS, WSSext and S2016 (AFD)

Individual color corrector for video path A and B

Transparent for 8 channels of embedded audio per channel

Embedded domain cross input audio shuffling, gain and phase
control (2GF/2HF/2SF/2SF110 only)

Embedding and de-embedding through synapse bus

Video proc-amp (Y and C control)

Color corrector (RGB and total gain, RGB and total black)

Hue control for NTSC inputs

Locks to a Bi-Level or a Tri-level sync, or to an SDI input.

Full control and status monitoring through the front panel of the
SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
NOTE:
The frame synchronizer works at best if the inputs are
switched according the SMPTE guidelines described in RP168.
This ensures that not only the picture but also the ancillary data
remains correct. The frame synchronizer however can handle
complete asynchronous switching at the input.
To ensure correct operation the F-delay of the card needs to be 1 or
higher so there is enough time to mask the error.