INSTALLATION AND CONFIGURATION MANUAL
2GF100/110 – 2HF100/110
–
2SF100/110
16
switch back when the input fails again. Default is
on
.
#F-delay
F-Delay
sets the amount of delayed Frames. The available range
is from 0 to 250 fields (dependant on the I/O). Default is
0F
. The
preset master for this is
Out-Frmt
, hence the ‘#’-prefix.
#V-delay
V-Delay
setting allows adjustment of the vertical phase of the
output signal with respect to the selected reference input.
The
V-Delay
setting gives a delay in addition to the reference
timing. For example: if the
V-Delay
is set to 10 TV HD lines, the
output signal will be delayed by reference 10 TV HD lines.
The signal is delayed (advanced) with respect to the phase of the
reference signal. The available range is from 0 to a maximum of
1125 lines (dependant on I/O format). The default setting is
0ln
.
The preset master for this is
Out-Frmt
, hence the ‘#’-prefix.
#H-delay
The H-Delay setting allows adjustment of the Horizontal phase of
the output signal with respect to the selected reference input.
The H-Delay setting gives a delay in addition to the reference
timing. For example: if the H-Delay is set to 10 pixels, the output
signal will be delayed by reference 10 pixels. The signal is
delayed (advanced) with respect to the phase of the reference signal.
The available range is from 0 to a maximum of 5124 pixels
(dependant on I/O format). The default setting is
0px
. The preset
master for this is
Out-Frmt
, hence the ‘#’-prefix.
#Freeze_A
Freeze_A enables the capture of one Video Field or Frame
(depending on the setting
Freeze_Mode
) for outputs A. The
settings for
Freeze
are
On
or
Off
. The default is
Off
.
#Freeze_B
Freeze_B enables the capture of one Video Field or Frame
(depending on the setting
Freeze_Mode
) for outputs B. The
settings for
Freeze
are
On
or
Off
. The default is
Off
.
Delay-Status
It is possible to display (in the status menu
IODelayA
and
IODelayB
) the processing time of the card in the status menu.
This setting allows you to switch this function
ON
or
OFF
.
Default setting is
OFF
Summary of Contents for Synapse 2GF100/110
Page 42: ...INSTALLATION AND CONFIGURATION MANUAL 2GF100 110 2HF100 110 2SF100 110 40 9 Block Schematic ...
Page 52: ......
Page 53: ......
