EVS Broadcast Equipment SA
25
(
GPI
,
GPI-A
,
GPI-B
or
GPI-C
), via the SD aspect ratio (
SD-AR
)
or via the HD aspect ratio (
S2016
).
Audio_Prst_act
With this item you can manually change the currently active audio
preset. Can be any preset between 1 and 16. By default it is set to 1.
All menu settings that are preceded with a ‘
#Emb
’-prefix are part of
the preset.
Audio_Prst_Edit
Here you can select which of the 16 selectable audio presets you
want to edit. Changing this will not change the active preset, unless
the currently active preset is the same you are going to edit. All
menu settings that are preceded with a ‘
#Emb
’-prefix are part of the
preset.
#Audio-Dly-sInp1
(2GF/2HF110 only)
With this item you can delay all audio on input 1 between -10000ms
and 10000ms with 0.01ms increments, allowing for precise control
(2 sample accuracy in practice). Default is 0ms. This item is part of
the audio presets. This audio delay is calculated on top of the
tracked video delay.
#Audio-Dly-sInp2
(2GF/2HF110 only)
With this item you can delay all audio on input 2 between -10000ms
and 10000ms with 0.01ms increments, allowing for precise control
(2 sample accuracy in practice). Default is 0ms. This item is part of
the audio presets. This audio delay is calculated on top of the
tracked video delay.
EMBEDDER
#Emb-AB-Mode
With Emb-AB-Mode you select how the audio in groups A and B
should be embedded into the video:
overwrite
the exsisting
audio, or
Append
. Default is
overwrite
.
#EmbA_Grp
With this setting you select in to which audio group (= 4 audio
channels) of the outputs you want to embed the first 4 forwarded
audio channels coming from the de-embedders/add-on bus. Can be
group1
,
group2
,
group3
or
group4
. You can also choose to
not use these 4 audio channels for anything by setting this item to
off
. By default it is set to
Group1
.
#EmbA1_Inp ~
#EmbA4_Inp
With these settings you can select where the corresponding audio
channels (channel A1 till channel A4) of the outputs are coming
from. In this card you can choose to get the audio from the de-
embedder of SDI input 1 (
Demb-SDI1
) or SDI input 2 (
Demb-
Summary of Contents for Synapse 2GF100/110
Page 42: ...INSTALLATION AND CONFIGURATION MANUAL 2GF100 110 2HF100 110 2SF100 110 40 9 Block Schematic ...
Page 52: ......
Page 53: ......
