EVS Broadcast Equipment SA
23
R-BlackA
R-BlackA
controls the Red-Black of channel A. The control range
is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
G-BlackA
G-BlackA
controls the Green-Black of channel A. The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
B-BlackA
B-BlackA
controls the Blue-Black of channel A. The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
BlackB
BlackB
ontrols the total R-G-B Black gain of channel B The
control range is between –128bit and 127bit. The default setting is
0bit.
R-BlackB
R-BlackB
controls the Red-Black of channel B The control range
is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
G-BlackB
G-BlackB
ontrols the Green-Black of channel B The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
B-BlackB
B-BlackB
controls the Blue-Black of channel B. The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
CVBS-Hue
This item adjusts the HUE of the CVBS input. Can be set between -
90 and +90 degrees. Default is 0 degrees.
AUDIO PROC AMP
Audio-Phase
If this setting is set to
Align
, the card ensures audio-phase
alignment between multiple audio channels and audio groups,
which is necessary for multi-channel (surround) purposes. If errors
in the signal-chain occur the de-embedder blocks reset
synchronously to maintain audio-phase-alignment.
If this setting is set to
Off
, the card eats-all audio including errors.
Even if there are DBN/ANC/ECC or channel-sequence errors, the
de-embedder will pass them. Be aware that audio-phase-alignment
between multiple audio channels and audio groups cannot be
Summary of Contents for Synapse 2GF100/110
Page 42: ...INSTALLATION AND CONFIGURATION MANUAL 2GF100 110 2HF100 110 2SF100 110 40 9 Block Schematic ...
Page 52: ......
Page 53: ......
