20
WT.025.200.000.DE.IM 0517
Description
S10k
3.
Control of the gas feedrate is achieved by by turning the control
knob
•
in the anti-clockwise direction to increase the flowrate or
•
in the clockwise direction to decrease the flowrate.
If the float touches the upper stop, the range is exceeded and the
reading is not valid.
3.4
Injector
Standard injectors
W3T171367 : sizee 1" up to 10 kg/hour
W3T171369: size 3/4" up to 4 kg/hour
The injectors are fitted with check valves to prevent a back flow of
water into the gas feeder if the injector is subject to positive back
pressure when it is shut down or if the solution discharge line be-
comes blocked.
Anti-syphon injectors
W3T171368: size 1" up to 10 kg/hour
W3T171370: size 3/4" up to 4 kg/hour
Anti-syphon versions of both injectors are available and are basi-
cally as described above but are fitted with a second, spring loa-
ded, diaphragm assembly to provide a positive shut-off against
negative back pressure at the injector.
Both the standard and anti-syphon injectors are mounted remotely
from the demand valve and the flowmeter assembly.
Summary of Contents for WALLACE & TIERNAN S10k
