10
WT.025.200.000.DE.IM 0517
Safety
S10k
2.
2.2
General safety instructions
Evoqua attaches great importance to the safety of all work relating
to the system. This was already taken into account in the design of
the system, by the integration of safety features.
Safety instructions
The safety instructions in this documentation must always be
observed. These do not affect the validity of any additional national
or company safety instructions.
Safety instructions printed on
the system
All safety instructions attached to the system must be observed.
They must always be complete and easily legible.
Technical standard
The system has been constructed using the best available
technology and according to the accepted safety regulations.
However, danger to the life and limbs of users or third parties or
damage to the system or other property cannot be ruled out if the
system, if the system is used by unqualified persons. Installation
and maintenance, as well as any work that is not described in this
operating manual may only be performed by authorized personnel.
Personnel
The operator of the overall system must ensure that only
authorized and qualified technicians can work on or with the
system, and within their specified area of responsibility.
"Authorized and qualified personnel" include:
Operation
personnel of the operator who have been trained and instructed by
Evoqua or a service partner.
Installation, Commissioning
and Maintenance level 2
Only Evoqua service personnel or personnel who have been
trained and authorized by Evoqua.
Electrical work
Authorized and qualified electrical technicians
Spare parts / components
The trouble-free operation of the system can only be guaranteed,
if original spare parts and components are used in the combination
described in this instruction manual. Otherwise there is a danger
of malfunction or damage to the system.
Modifications and extensions
Never attempt to rebuild, modify or extend the system without
written approval from the manufacturer!
Electrical power
During normal operation, the control cabinet must remain closed.
Connect cables in accordance with the wiring diagram.
Waste disposal
Ensure safe and environmentally-friendly disposal of agents and
replaced parts.
Summary of Contents for WALLACE & TIERNAN S10k
