S10k
Installation
4.
27
4.4.2
Connection to a chlorine drum
A
Relief line
B
Operating knob (to close the valve turn clockwise)
C to the flowmeter assembly and the injector
D Connection to the drum valve (gasket W3T172026 )
E
Connection to the vacuum deamnd valve S10k
(gasket W3T172027 + filter W3T167914 )
F
Heater
G Adaptor W3T166148
•
Connect only to the drum valve "Gaseous Chlorine", never to
the drum valve "Liquid chlorine".
•
Always use the adaptator W3T166148 to connect the S10k to
a chlorine drum.
•
Open the drum valve slowly.
•
When changing the drum:
•
Close the operation knob, close the drum valve.
•
Put on your gas mask.
•
Remove the from the adaptator, replace the gasket
W3T172027 and the filter W3T167914.
•
Connect the adaptator to the valve of a new drum using a
new flat gasket W3T172026.
A
B
C
E D
G F
Summary of Contents for WALLACE & TIERNAN S10k
