14 |
P a g e
Installation Requirements
Assembling and Mounting
Refer to all Safety Precautions and Unpacking your Evolve Refrigerator for proper and
recommended assembling and mounting procedures.
Leveling
Adjust the leveling feet located underneath the refrigerator by turning clockwise to extend
the feet, counter clockwise to shorten them. It is important that the unit is level.
Supply Circuit
The supply circuit/appliance inlet rating is 100-240 VAC, 50/60 Hz. Circuit must contain
connection to earth ground.
Ventilation
Proper ventilation of the refrigerator is required. Rubber bumpers located on the back of the
unit provide the minimum ventilation required.
Providing Ventilation
When choosing a location, be sure to provide adequate
ventilation around your Evolve compact refrigerator.
We suggest three inches of rear clearance. There are
two rubber bumpers on the back of your refrigerator
which must remain installed to ensure a minimum
clearance for adequate ventilation.
The fans on your product will run at intervals of variable speeds and may turn
off completely. They do not run constantly. If the fans run frequently, the
product may require more space for ventilation. Please refer to the section
on how to clean and troubleshoot the fan for more information.
Do not locate or store your refrigerator outdoors. This model was designed
for indoor use only and violation of this will void the terms of your warranty.
Warning: Fan has moving parts, product has uninsulated live parts and hot
parts. Do not remove the back panel or attempt repairs. For repairs or
operating issues please call Customer Care at 1-844-476-4202 for guidance
and instructions.
