- 4 -
SETTING ALARM CLOCK
1.
In on-hook state, press [SET/
÷
] key then UP/- key 3 times, LCD displays ALERT
2.
Press [SET/
÷
]key and UP/- or DOWN/+ key to set alarm time, press [SET/
÷
]key to move and confirm and press
UP/- or DOWN/+ to select ON or OFF.
3.
Press DELETE key to quit.
Note;
After plug the outline, and time up of the alarm clock, the unit will sound “di,di”
SETTING LCD CONTRAST
In on-hook state, Press [SET/
÷
] key, and press [UP/-]key three times,then LCD displays
“
SET 6 FLASH
”
.Press
[SET/
÷
] key to go into ,the LCD displays
“
FLASH 3 600
”
,total 4.Then press UP/- or DOWN/+ key to
select one of these 4groups,and the flash time is
corresponding with the right number
FSK message auto-adjust real time
When you have subscribed caller ID service from the local area telecom, when the FSK message comes, the unit will
auto-adjust the real time.
The phone can record 29 incoming calls. Over 29 incoming calls, the earliest one will be replaced. For repeat incoming
call, LCD displays “REP”.
If the incoming call subscribed secret service, LCD displays “---P---”.
If incoming call is from an area without Call ID service, LCD displays “---O---”.
REVIEWING, CALLING BACK AND DELETING INCOMING CALL
Reviewing Incoming Call
1.
In on-hook state.
2.
Press DOWN/+ key, LCD displays the latest incoming message.
3.
Press DOWN/+key continually, LCD displays ---End---, all records be checked.Press UP/- or DOWN/+ key longer
than 3 seconds,can check all the records fast
Calling Back Incoming Call
Calling back the local area call:
The unit can auto-filter local area code, after setting the local area code (Refer local area code setting). The unit will
auto-distinguish the local call and will display the number. Review the desired number and press REDIAL key to dial out
the number displaying on LCD.
Calling back the long distance call:
If LCD displays the number led by “0”, press REDIAL key to call back the number. If no “0”, press REDIAL key two
times. The unit will auto-add “0” and dial out the number displaying on LCD.
Note:
Only install the batteries, the unit can add “0” when call back a long distance number.
Deleting Incoming Call
1.
Review the desired incoming number
2.
Press DELETE/EXIT key to delete the number, then LCD displays the next number.
Note:
Press DELETE/EXIT key for 3 seconds, all the incoming message will be erased.
REVIEWING, CALLING BACK AND DELETING OUTGOING CALL
The phone can record 16 outgoing messages, sequence number and conversation time. You may review, call back and
delete outgoing calls. If over 6 outgoing calls, the earliest one will be replaced. When you review outgoing calls, LCD
will not display real date and time, but display the conversation time.
Reviewing outgoing Call