1
User Manual
Thanks for using your QUO INFINITY PQ5 smart phone. This quick start guide will help you
better understand the QUO Infinity PQ5 smart phone and how to use the important functions.
For more detailed manual please refer to www.QUOmobility.com. The image here exposed
could be referential and have aesthetic and operational changes.
Power key: Press and hold this key to turn on /off the mobile phone; In standby state, press this
key to turn on /off the screen
Menu key: Press this key to open the actions list, so that you can execute the action in
current interface or menu.
Home key: Press this key to return to the home page from any application or interface.
Back key: Press this to return to pervious interface, or close the dialog side key: press this
key to adjust volume
Installation Method And Precautions of Sim Card
By setting pin (personal identification number) code of the SIM card, you can protect your SIM
card front illegal operation.
Installing Sim Card
This is a dual SIM mobile phone with two sim slots. Please turn off the mobile phone first, take
out the battery, and insert the SIM card into the slot as shown in the picture below; then, place
the battery into the battery jar and install the battery cover.
Connecting to network
When the SIM card is decrypted, the mobile phone will search registered network or available
local network automatically. Once connected, the logo of the network operator appears in the
top of the screen, the mobile phone is in standby state, and you can make or answer calls.
Please contact your network operator if the SIM card has a failure.
Precautions of SIM card:
• Put the SIM card out of children’ s reach.
• Please use, insert and remove the SIM card carefully because the SIM card and
its contacts are prone to be scratched or damaged by bending.
• Do not expose the SIM card to electrostatic, dusty or moist environment.
Operation and installation methods of SD card
SD card is a removable mobile memory card inside the mobile phone and used for extending
the storage space of the mobile phone.
Battery and charging methods
1. Connect the charger to provided USB cable.
2. Connect the charger plug to the power outlet.
3. Connect the USB cable to the mobile phone; this icon indicates the charging
status.
4. The battery is fully charge when the status icon changes to; please disconnect the
charger from the power outlet.
5. Disconnect the charger from the mobile phone.
Note: If the battery isn’t used for a long time or the battery is used up, the mobile phone may
be not turned on normally while charging. It is normal, Please charge for a while before turning
on the mobile phone.
The battery can be charged repeatedly; however, it is consumable product, please change a
new battery if the standby duration reduces significantly.
The data service consumes more power and will reduce the standby duration.
The charging time changes according to temperature and battery usage. The mobile phone
will show prompt if the battery is too low. The mobile phone will power off automatically if
battery level drops too low.
Introduction
mobility
.com
User Manual
