Mini-USB
Instructions Manual
LED Indicator
Phone compatibility
Pitch axis angle range
Horizontal shaft angle
Pitch axis control angle
Bluetooth
Battery
Charging time
Maximum power
Working duration
Material
Size
Weight
Smart phone with screen size less than 5.5”
± 175 degrees
± 55 degrees
± 45 degrees
1,000 mAh Li-Po
2-3 hours
<= 10w
2-5 hours constantly (depending on phone weight)
PC engineering plastic
150(L) x 48(W) x 54(MH)
189g
Need to charge when red LED slowly flashes
Ready for auto turn off when red LED rapidly flashes
Bluetooth connection is available when blue light
dimly flashes (Bluetooth version only)
Works normally when blue LED lights up constantly
1.PRODUCT PARAMETERS
Low consumption International Bluetooth 4.0 standard
2.PACKAGING COMPONENTS
Handheld gimbal
Charging cord
Hex allen wrench
Velvet bag
Instructions manual
Certificate of quality
EVA thickening pads
(only needed for small-sized smart phone)
Certificate of quality
3.STRUCTURES OF HANDHELD GIMBAL
Green LED light is on when charging.
LED light is off when charging has completed.
Power switch
(press and hold for two
seconds to turn on/off)
LED indicator
(5V Power Adaptor)
Charging port
TILT knob
(Center is photo
/video button
- Bluetooth
version only
ATTENTION
This gimbals is motor-lock protective. When
bumped or obstructed, the gimbals will
automatically shut off in 10-15 seconds.
The packaging and user manual contain important
information and should be kept for future reference.
Safety Instructions
1)Keep the device away from flammable materials and heat sources
when charging. Do not cover either the device or the charger.
Make sure to charge under safe and ventilated circumstances.
2)Never leave the charging process unattended.
3)Keep the device away from water, oil and other corrosive liquids
or gases to avoid short circuit that might damage the electronic
system or lead to battery explosion.
4)Charge the device regularly when not in use for long periods of
time.
5)Turn off the device and stop charging immediately when there is
a burning smell, deformation or other abnormal cases occur. Be
sure to handle the device properly.
Instructions for disposal of WEEE by users in the European
Union
This product must not be disposed of with other wastes. Instead, it
is the user’s responsibility to dispose of their waste equipment by
handing it over to a designated point of collection for the recycling
of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of
disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the
environment. For more information about where you can drop off
your waste equipment for recycling, please contact your local city
office, your household waste disposal service or where you
purchased the product.
Disclaimer
Misoperation of charging might lead to fire and personal injury or
property damage. User of this device agrees to acknowledge all
risks in using the device.
Other device:
This device complies with part 15 of the FCC Rules. Operation is
subject tothe following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
ATTENTION
2
axis stabilizing system
Bluetooth connection
Foldable structure
RoHS
Warning
“
Shanghai RUIPAI Intelligent technology Co.Ltd.", the
manufacturers, wholesalers and dealers do not bear any legal
responsibility for any accidents the user might incur that was not
caused by the quality of the product. Please read the instruction,
especially the caring part carefully. If you are unsure how to charge
the device, please consult your local dealer
before use.
Class B device:
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
