- 2 -
LCD description
REP
：
This icon is displayed when a call comes in more than twice, the time displaying is the last number.
OUT is displayed when reviewing the outgoing number.
Note:
Do not expose LCD in the sun for a long time
GETTING STARTED
Input 3 AA batteries into the batteries compartment according to the correct polarity. The upper line of LCD will display
month, date and time. The lower line will display year.
Insert one end of the line cord to the line jack of the base and the other end to the exchange.
Connect the handset and the unit with coiled line.
RECEIVING CALL
The unit will ring when a call comes. If you have subscribed caller ID service to your local telecom, the upper line of
LCD will display month, date, time and serial number of the incoming call, lower line will display the incoming number.
If a call comes in twice or more, on the left of the middle line will display REP icon. You can answer the phone or not by
the incoming number.
From the Handset
1.
Pick up the handset and talk to the other end
2.
After finished, return the handset to the base.
Switch to HF
1.
When talking by handset, press
key and return the handset to the base;
2.
After finished, press
key again.
From HF
1.
When the unit rings, press
key and talk to the caller;
2.
After finished, press
key again.
Note:
Generally telecom transmits the incoming message between the first ring and the second ring. So please answer the phone
after the second ring.
MAKING CALL
From Handset
Pick up the handset;
1.
When hearing the dialing tone, dial the desired number. The LCD will auto-timer the conversation after 6 seconds;
2.
After finished, return the handset to the base.
From HF
1.
Press
key
2.
When hearing the dialing tone, dial the desired number. The LCD will auto-timer the conversation after 6 seconds;
3.
After finished, press
key again.
REDIALING FUNCTION
When dialing out a number but the line is busy. Return the handset to the base.
1.
Pick up the handset
2.
PressREDIAL key, the number dialed will be dialed out