- 3 -
USING PABX TO DIAL OUT A NUMBER
1.
In off-hook state,
2.
Press PABX access number (normal 0 or 9) than pressREDIAL key to dial the desired number
Note:
If the exchange cannot transmit the information coming from the telecom, the unit cannot display Caller ID message.
HOLD ON MUSIC
If you have something else to do during conversation and want to hold the line in the meantime
1.
Press HOLD/RING/
÷
key and return handset to the base, the other end will hear music
2.
Pick up handset to proceed conversation when you come back
RING KEY
In on-hook state, press Ring key to enter and select the ring mode
In on-hook state, press Ring key to select the ring you like,then the LCD will display RING 01
”~“
RING 20
”
.
At the same time,the phone will play the ring chose.Press Volume can adjust volume,and the LCD will display
RINGVOL 1
(
1~3
)
and OFF
SETTING FUNCTION
Setting Key(Insert Battery)
In
on-hook
state,Press
[SET/
÷
]key
to
enter
setting
mode,and
the
LCD
will
display
“
”.Then press [UP/-]
、
[DOWN/+] key to change settings,and the LCD will display the
corresponding setting.Press [SET/
÷
] to go into this setting.After setting,press [SET/
÷
]key to enter the next
setting.All settings can use [UP/-]
、
[DOWN/+] key to modify,and use Delete key to exist.
SETTING THE DATE &TIME
1.
In on-hook state, press[SET/
÷
] key, LCD displays
2.
Press [SET/
÷
] key again, the last two digits of year flash;
3.
Press UP/- or DOWN/+ key to edit the year, press [SET/
÷
] key to confirm, by using the same method to set the
month, date, hour and minute.
4.
Press DELETE key to quit.
Note:
Scope: Month: 01-12 Date: 01-31 Hour: 00-23 Minute: 00-59
SETTING LOCAL AREA CODE
1.
In on-hook state, press [SET/
÷
]key and UP/- key, LCD will display
2.
Press [SET/
÷
]again,then Press UP/- or DOWN/+ key to set the first digit of local area code;
3.
Press[SET/
÷
]key to confirm and enter the second digit setting, by using the same method to set the last 4 digits.
4.
Press DELETE key to quit.
Note:
If the local area code is only four digits, the last digit can be left as “–“
SETTING PABX ACCESS CODE
1.
Press [SET/
÷
] key and UP/- key 2 times, LCD displays
2.
Press [SET/
÷
] and press UP/- or DOWN/+ key to set the first digit, press[SET/
÷
] key to confirm to enter the next
one,
3.
Press DELETE key to quit.
Note:
There is only one digit of PABX access code