- 5 -
1.
In on-hook or off-hook state
2.
Press OUT/× key, LCD displays the last dialed number.
3.
Press OUT/× key continuously, LCD displays ---End---
Redial outgoing Call
1.
In on-hook state.
2.
Press OUT/× key to check the desired number.
3.
Press REDIAL key, the number will be dialed out automatically.
Deleting outgoing Call
1.
Press OUT/× key to check the number.
2.
Press DELETE/EXIT key to erase the number, and LCD displays the next number.
Note:
Press DELETE/EXIT key for 3 seconds, all the outgoing calls will be erased.
PRE-DIALING FUNCTION
1.
In on-hook state
2.
Dial the desired number, if any mistake use DELETE/EXIT key to edit.
3.
Press REDIAL key the number dialed will be auto-dial out.
ADJUST VOLUME OF RING
In on-hook state,
Press VOL key, LCD displays
“
RINGVOL 1
”
, press VOL key to adjust the volume, total 2 levers.
REDIAL FUNCTION
In
off-hook state,
press this key can redial the last number dialed.
TAKE-UP FUNCTION
In on-hook state,press this key ,then the telephone will take up automatically
SETTING STEAL-DIALING ALARM
Press #/= key 3 seconds to toggle PPP OFF/ PPP ON
Note: Please set alarm OFF if you connect any extension to the unit or the unit is connected with the line lower than 24V,
otherwise the unit cannot work properly.
SETTING ALARM CLOCK
If you set alarm clock is on,then it will ring every 50seconds.Press any keys to cancel the alarm.If the telephone is the
state of off-hook or ringing , this alarm will be deleted automatically
CALCULATED FUNCTION
In on/off-hook state, press CAL key to enter the calculated state.
CAL key is the calculator function.When press [DELETE],On/Off hook state,new incoming call,alarm,the telephone will
exist the calculator.The calculator has 10 digits.
“-”stands for “.”.The result is over 10 digits,then
will be roundrd up.When the
virtual value can’t be displayed,then the LCD will display
“ERROR”.
BACKLIGHT FUNCTION
Input 3 AA batteries into the batteries compartment according to the correct polarity.When press any keys,ringing and
calls,the light will be on.After finishing,the light will be off automatically.
LOCK
1.
Turn the key to Yellow, All numbers will be locked (except
110、119、120、122）
2.
Turn the key toGreen, the numbers led by
“.”
Can not be dialed out.
3.
Turn the key to Red,All numbers can be dialed out.
OTHER FUNCTION
Ring Indication
In the hand-free mode,when there is a new incoming call,the ring light will be on